Bryston PowerPac 60 SST
The Bryston PowerPac 60 amplifier, is a no-compromise, modular, single channel power amplifier delivering 60 watts at 8 Ohms, or 100 watts into 4 Ohms. The PowerPac 60 is a modular monaural version of our very popular 2B-LP stereo amplifier but designed to be utilized in applications where portability, sound quality and flexibility are of prime importance. The PowerPac 60 is a perfect choice for use as a portable power amplifier which can be attached directly to the rear of your loudspeaker. This provides for the use of very short speaker leads resulting in a much improved loudspeaker/amplifier interface. The PowerPac 60 can also be bolted on the wall for utilization in audio/video surround systems (left/right/center/rears) where a non-conspicuous power module is required. A further application would be in multi-room audio systems where single or multiple amplifiers are needed to provide music in adjacent rooms. Finally, with the recent popularity in passively or actively amplifying the individual drivers in your stereo loudspeakers the Bryston PowerPac 60 would be ideal for use in this capacity.
Технические характеристики:
We invite you to experience the Bryston SST2 Series amplifiers 20 Year Warranty -A Generation of Music Power Output 60 watts at 8 ohms100 watts at 4 ohms Distortion Less than 0.009% from 20Hz to 20kHz at 60 watts, IM or THD Noise >101db below full output Slew Rate Greater than 60 volts per microsecond Power bandwidth Less than 1Hz to over 100kHz Damping factor Over 500 at 20Hz, ref. 8 ohms Input sensitivityand impedance 0.75V in for 60 watts out, 10k unbalanced 20k balanced Features Over 600 cm/square of heatsinking: over 2000 cm/square with chassis Regulated power supplies all voltage gain stages Gold plated input and output connectors Switchable balanced XLR 1/4 inch and RCA unbalanced inputs A/C PowerConsumption &Heat Load 1. Idle Current 18W 2. 8 Ohms (60W ea.) 144W 3. 4 Ohms (100W ea.) 252W 4.
